12FW75Q1 LF Drivers 12 inchs

Notes

- 3 INCH EDGEWOUND CCA VOICE COIL
 
- 97 dB/SPL SENSITIVITY
 
- 800 WATT PROGRAM POWER HANDING
 
- FEM OPTIMIZED MOTOR AND SUSPENSIONS
 
- OPTIMIZED COOLING SYSTEM
 
- RESONANCE FREE AND HEAVY DUTY BASKET DESIGN

GENERAL SPECIFICATIONS

Nominal diameter 311(12) mm (in.)
Nominal impedance 8 Ω
Minimum impedance 6.6 Ω
Program power (1) 800 W
AES Power rating(2) 400 W
Sensitivity (3) 97 dB
Frequency range 57 ~ 3500 Hz
Voice coil diameter 75(3) mm (in.)
Chassis material Aluminium
Magnet material Ferrite
Magnet dimensions (ODxIDxh) 170 x 85 x 20 mm
Coil material CCAW
Former material Glass Fiber
Xmax(4) 6.7 mm
Xmech(5) 11.5 mm
Gap height 9 mm
Voice coil Winding height 18 mm

SMALL SIGNAL PARAMETERS

DC resistance(Re) 5.3 Ω
Resonance frequency(Fs) 57 Hz
Moving mass(Mms) 65 g
Compliance(Cms) 0.17 mm/N
Force factor(BL) 17.20 N/A
Mechanical Q-factor(Qms) 5.4
Electrical Q-factor(Qes) 0.37
Total Q-factor(Qts) 0.34
Equivalent air volume(Vas) 44 I
Voice coil Inductance(Le) 0.70 mH
Diaphragm area(Sd) 544 cm2
Reference efficiency(Eta O) 2.9 %

SHIPPING INFORMATION

Net weight 5.4 Kg
Multipack size (1) (W x D x H) 325 x 325 x 175 mm
Multipack weight 6 Kg

OTHERS

(1)Program power is defined as 3 dB greater than AES Power.
(2) Tested for two hours using a continuous, band-limited pink noise signal as per AES 2-1984 Rev. 2003. Loudspeaker tested in free air.
(3) From T/S parameters, measured with LMS DA LPM module.
(4) The Xmax is calculated as: (Hvc - Hg)/2+ Hg/4. Hvc is the voice coil height and Hg the gap height.
(5) The Xmech is calculated as: (Hvc - Hg)/2 +(Hg-2). Hvc is the voice coil height and Hg the gap height.
(6) Thiele-Small parameters are measured after preconditioning: a) at 20°C- 22°C, 50% humidity for 2 hours; b) by LMS LSI measurement.