12NDF100C1 Line Array Speakers 12 inches

Notes

-4  INCH  COPPER  VOICE  COIL 
 
-99.8 dB/SPL SENSITIVITY
 
-1400  WATT  PROGRAM  POWER  HANDING
 
-FEM  OPTIMIZED  MOTOR  AND  SUSPENSIONS
 
-OPTIMIZED  COOLING  SYSTEM
 
-RESONANCE FREE AND HEAVY DUTY BASKET DESIGN
 
-DUAL GAP MOTOS  LINEARIZE  INDUCTANCE

-IDEAL FOR TWO-WAYS AND LINE ARRAY APPLICATION
 

GENERAL SPECIFICATIONS

Nominal diameter 320(12) mm (in.)
Nominal impedance 8 Ω
Minimum impedance 5.8 Ω
Program power (1) 1400 W
AES Power rating(2) 700 W
Sensitivity (3) 99.8 dB
Frequency range 50~3000 Hz
Voice coil diameter 100(4) mm (in.)
Chassis material Aluminium
Magnet material Neodymium
Magnet dimensions (ODxIDxh) 97X25X10 mm
Coil material ALR
Former material Glass Fiber
Xmax(4) 6 mm
Xmech(5) 13 mm
Gap height 12X2 mm
Voice coil Winding height 40 mm

SMALL SIGNAL PARAMETERS

DC resistance(Re) 5 Ω
Resonance frequency(Fs) 50.7 Hz
Moving mass(Mms) 61.8 g
Compliance(Cms) 0.15 mm/N
Force factor(BL) 23.9 N/A
Mechanical Q-factor(Qms) 6.1
Electrical Q-factor(Qes) 0.25
Total Q-factor(Qts) 0.24
Equivalent air volume(Vas) 73.8 I
Voice coil Inductance(Le) 1.5 mH
Diaphragm area(Sd) 572 cm2
Reference efficiency(Eta O) 3.6 %

SHIPPING INFORMATION

Net weight 3.8 Kg
Multipack size (1) (W x D x H) 320x320x190 mm
Multipack weight 4.3 Kg

OTHERS

(1)Program power is defined as 3 dB greater than AES Power.
(2) Tested for two hours using a continuous, band-limited pink noise signal as per AES 2-1984 Rev. 2003. Loudspeaker tested in free air.
(3) From T/S parameters, measured with LMS DA LPM module.
(4) The Xmax is calculated as: (Hvc - Hg)/2+ Hg/4. Hvc is the voice coil height and Hg the gap height.
(5) The Xmech is calculated as: (Hvc - Hg)/2 +(Hg-2). Hvc is the voice coil height and Hg the gap height.
(6) Thiele-Small parameters are measured after preconditioning: a) at 20°C- 22°C, 50% humidity for 2 hours; b) by LMS LSI measurement