18NDS125AU Subwoofers 18 inchs

Notes

5 INCH COPPER VOICE COIL
 
97.1 dB/SPL SENSITIVITY
 
3000 WATT PROGRAM POWER HANDING
 
FEM OPTIMIZED MOTOR AND SUSPENSIONS
 
46mm PEAK TO PEAK MAXIMUM EXCURSION
 
OPTIMIZED COOLING SYSTEM
 
 - DOUBLE SPIDER
 
RESONANCE FREE AND HEAVY DUTY BASKET DESIGN
 
TRIPLE ROLL SURROUND

GENERAL SPECIFICATIONS

Nominal diameter 460(18) mm (in.)
Nominal impedance 8 Ω
Minimum impedance 7.7 Ω
Program power (1) 3000 W
AES Power rating(2) 1500 W
Sensitivity (3) 97.1 dB
Frequency range 34~1000 Hz
Voice coil diameter 125(5) mm (in.)
Chassis material Aluminium
Magnet material Neodymium
Magnet dimensions (ODxIDxh) 115 x 45 x16 mm
Coil material SV
Former material Glass Fiber
Xmax(4) 14.5 mm
Xmech(5) 23 mm
Gap height 14 mm
Voice coil Winding height 36 mm

SMALL SIGNAL PARAMETERS

DC resistance(Re) 6 Ω
Resonance frequency(Fs) 34 Hz
Moving mass(Mms) 267 g
Compliance(Cms) 0.08 mm/N
Force factor(BL) 27.1 N/A
Mechanical Q-factor(Qms) 7.38
Electrical Q-factor(Qes) 0.39
Total Q-factor(Qts) 0.37
Equivalent air volume(Vas) 211 I
Voice coil Inductance(Le) 2.77 mH
Diaphragm area(Sd) 1325 cm2
Reference efficiency(Eta O) 2.8 %

SHIPPING INFORMATION

Net weight 11.9 Kg
Multipack size (1) (W x D x H) 485 x 485 x 262 mm
Multipack weight 13.8 Kg

OTHERS

(1)Program power is defined as 3 dB greater than AES Power. 
(2) Tested for two hours using a continuous, band-limited pink noise signal as per AES 2-1984 Rev. 2003. Loudspeaker tested in free air.
(3) From T/S parameters, measured with LMS DA LPM module. 
(4) The Xmax is calculated as: (Hvc - Hg)/2+ Hg/4. Hvc is the voice coil height and Hg the gap height. 
(5) The Xmech is calculated as: (Hvc - Hg)/2 +(Hg-2). Hvc is the voice coil height and Hg the gap height.
(6) Thiele-Small parameters are measured after preconditioning: a) at 20°C- 22°C, 50% humidity for 2 hours; b) by LMS LSI measurement.